Die BundleRound Tube Die Bundle (7/8 Pin)
Die Bundle
Round Tube Die Bundle (7/8 Pin)

.75 (3/4) and .875 (7/8) Combo Die

$197.00

(3 customer reviews)
SKU: N/A Category:

  • Weight:

    14 lbs

  • Dimensions:

    11 × 11 × 2 in

  • Die Size:

    .675 and .840 x 3.5 CLR, .75 (3/4) and .875 (7/8) x 2.5 CLR, 1.163 x 4.5 CLR EMT, 1.875 x 4.5 CLR, 2.00 x 4.5 CLR, 40mm x 152mm CLR, 5X Combo (select for details) x 2.5 CLR, 5X Combo (select for details) x 3.5 CLR, .50 Round/Square x 2.5 CLR, .50 Round/Square x 3.5 CLR, .625 Round/Square x 2.5 CLR, .625 (5/8") Round/Square x 3.5 CLR, .675 and .840 x 2.5 CLR, .75 (3/4) and .875 (7/8) x 3.5 CLR, 1.00 x 2.50 CLR, 1.00 x 3.5 CLR, 1.00 x 4.5 CLR, 1.00 x 6.00 CLR, 1.050 (3/4" pipe) x 3.5 CLR, 1.163 x 6.0 CLR EMT, 1.125 x 3.50, 1.125 x 6.00 CLR, 1.25 x 3.5 CLR, 1.25 x 4.5 CLR, 1.25 x 6.0 CLR, 1.315 (1" pipe) x 4.5 CLR, 1.315 (1" pipe) x 6.0CLR Die, 1.375 (1 3/8") x 4.5CLR, 1.375 (1 3/8") x 6.00 CLR, 1.50 x 3.50 CLR, 1.50 x 4.5CLR, 1.50 x 6.00CLR, 1.625 (1 5/8") x 4.5CLR, 1.625 (1 5/8") x 6.00CLR, 1.66 (1 1/4" pipe) x 4.5 CLR, 1.66 (1 1/4" pipe) x 6.00CLR, 1.75 x 4.5 CLR, 1.75 x 6.00 CLR, 1.875 (1 7/8") x 6.00 CLR, 1.90/1.875" (1 1/2" pipe)(1-7/8" Tube) x 4.5 CLR, 1.90/1.875"(1 1/2" Pipe)(1-7/8" Tube) x 6.00 CLR, 2.00 x 6.00 CLR, .75 square x 4.5 CLR, 1.00 SQUARE x 4.5 CLR, 1.00 square x 6.0 CLR, 1.25 square x 4.5 CLR, 1.25 Square x 6.00 CLR, 1.50 Square x 6.00 CLR (2x clamp block), 30mm x 114mm CLR

  • Pin Diameter:

    3/4" (see description), 7/8" (all 2023+ machines)

BUILD IT YOUR WAY

Customize The Options To Get The Perfect Tool For Your Needs

Choose your options

Description

Some of our benders use a 3/4 pin through the main die, while others use a 7/8 pin. You can easily measure this with calipers. All machines sold 2023 and later will use the 7/8″ pins.

For a complete range of wall thickness this die can bend, please visit our Wall Thickness Chart (LINK) and you will find the capacity for stainless, carbon steel (1020/4130/etc), and aluminum. All of our dies carry a lifetime warranty against breakage and can bend 195 degrees.

Pressure Roller Die upgrade- Speeds up loading the machine and also reduces friction on the dies, making lubrication unnecessary and also potentially improving bend quality slightly. They are great for STEEL, ALUMINUM, and STAINLESS. They also allow you to pull bends up to 20+ degrees through them to make “S” bends and bends very close together if you’re careful. Not available for all sizes.

NOTE: When you order a die from Rogue Fabrication, it comes with a clamp block and a pressure die. You can buy additional pressure dies (for capacity to match your 605 or 625 bender) or additional clamp blocks (for several reasons, see clamp block listing for details) separately if you want more. Also, dies 1.50″ OD and under that are on a 6.0″ centerline bending radius will be limited on travel by a few degrees per stroke due to space limitations. No other dies are affected.

3 reviews for .75 (3/4) and .875 (7/8) Combo Die

    Michael Owens
    01/24/2024
    We’ve bent hundreds of parts over the last couple of months made from 1.25” sch40 pipe, 1” solid bar, and 3/4” solid square bar with the RF bender and dies. Couldn’t be happier with this investment!
    Richard Palander
    07/31/2023
    Almost have a full set for nominal sizes. I’ve bent tons of hand rail on site, some roll cages and brush guards with these. Lately it’s been some small tube work for custom furniture. Running the heavy duty bender, great unit to have in the shop.
    Grant Holcombe
    03/07/2023
    Good selection and all 180+ deg capable, normally get new dies to me in under a week. Can't be beat.
Add a review

Your email address will not be published. Required fields are marked *

PRODUCTS YOU MAY ALSO LIKE...

  • Die Bundle

    1.163 EMT Bending Die

    $197.00 – $349.00
    Select options This product has multiple variants. The options may be chosen on the product page
  • Die Bundle

    2.00″ Bending Die

    $197.00 – $349.00
    Select options This product has multiple variants. The options may be chosen on the product page
  • Die Bundle

    1.00″ Square Bending Die

    $197.00 – $349.00
    Select options This product has multiple variants. The options may be chosen on the product page