bender conversion kit
bender conversion kit

M600/M600HD to M601/M605 Conversion Kit 3/4″ Pin (Upgrades old models to be like our current ones)

From: $323.50
(1 customer review)
Category:

BUILD IT YOUR WAY

Customize The Options To Get The Perfect Tool For Your Needs

Choose your options

Description

This is a complete kit to upgrade any M600 (2015 and newer, see FAQ for how to ID your machine’s vintage) to be a M601/605. These new machines allow you to put bends WAY closer together on small CLR dies (1.75″ closer on 3.5″ CLR and 3.13″ closer on 2.5″ CLR). The new models can also use 2.5″ CLR dies without any special equipment, and benefit from the same machine travel (195 degrees) with all dies (M600 machines can’t bend to 180 on 2.5 CLR dies).

Kit includes:

-Full bend wheel kit (both bend wheels, 2 sticker bars, weld on washers)

-Sticker sheets

-.629″ diameter S&D HSS drill bit (ideal clearance for a 5/8″ pin without needing a reamer)

-Weld-on side plates (QTY 2) for the pressure die on your bender. These are what you will use to locate the hole you will drill in your frame for the 2.5 CLR pressure die pin.

-Metallic Serial Number placard for your “new” machine. All M601/605/625 machines are serialized for tracking and warranty. Your newly converted machine is no different.

 

1 review for M600/M600HD to M601/M605 Conversion Kit 3/4″ Pin (Upgrades old models to be like our current ones)

    Img 1989
    Img 1991
    Img 1989
    +1
    Jason Sabat
    03/25/2025
    Like most, after months of bender research and some dabbling with other brands I finally found one of these local in the northeast. I couldn’t really afford all the upfront cost for new, but I quickly realized the evolution of the benders from Rogue. I am super OCD and the fact that they guided me on how to upgrade to a contemporary model was absolutely amazing. I know how hard it is being a small show with little to no supporting cast and they were phenomenal. Now onto the kit, the conversion was simple and straight forward without having to butcher the older style bender I bought. All the dies are still relevant and work without issue. I appreciate the advancements with laser etching and even some 3D printing mods for shims.
Add a review

Your email address will not be published. Required fields are marked *

PRODUCTS YOU MAY ALSO LIKE...

  • Laser Engraving Service Website Photo

    Laser Engraving Service – Clamp Block Bend Indexing

    $13.00
    Add to cart
  • Thin Wall Roller Website Photo

    Thin Wall Roller (T.W.R.) Assembly Upgrade – The best bends you can get without a mandrel!

    From: $0.00
    Select options
  • Vinyl Wrap Website Photo

    M601/605/625 Bender Vinyl Wrap Graphics (Current Machines) “SWAG”

    From: $139.00
    Select options